You are not logged in. Would you like to login or register?



20-11-2016 06:25:24  #1


Wide ribbon?

Hello all, 
I have a general question for the experts here:
Am considering restoring a really old Remington upstrike and realized now that the ribbon is much wider than what is available normally. Do some specialists in the world make ribbons for such machines??
Thanks in advance, 
Rushwarp

 

20-11-2016 09:51:27  #2


Re: Wide ribbon?

It depends on the size and how much you're willing to spend on ribbon. And it's not just early typewriters that used larger ribbons; I'm currently looking for inexpensive ribbon for my 1923 Continental (16mm), 1909 Adler 7 (25mm), and 1906 Empire (22mm). I have found a few sources, but the prices so far have been more than I'm willing to pay. What size does the Remington use? And which model is it?


The pronoun has always been capitalized in the English language for more than 700 years.
 

20-11-2016 11:49:47  #3


Re: Wide ribbon?

I don't have it here yet....It's a Remington standard model 6 that was made from the end of the 19th century to about 1912 or so? I can only see right away the riboon left on it is wide, I would guess18mm or so?
Of course I would not be typing on it a lot, but if I go to the trouble of restoration, then I want to al least experience typing on it firsthand 

     Thread Starter
 

20-11-2016 12:25:39  #4


Re: Wide ribbon?

Well, if it has a ribbon on it you might have the option of either 'refreshing' the ink or re-inking it yourself. I would never bother with either method for a 13mm ribbon, but it might be worth the effort for an oddball size. Next to performing an actual restoration it would be a relatively minor job.


The pronoun has always been capitalized in the English language for more than 700 years.
 

20-11-2016 12:42:31  #5


Re: Wide ribbon?

Also for a red/black ribbon?

     Thread Starter
 

20-11-2016 14:25:20  #6


Re: Wide ribbon?

Did early typewriter's have ribbon colour selector mechanisms? (I don't know a thing about them). If it's a bicolour ribbon then you'll probably only have revitalizing the ribbon as an option. Techniques - take them for what they're worth - have been discussed here in the past: http://typewriter.boardhost.com/viewtopic.php?id=25

Here are a few anecdotal descriptions of the ribbon revival process.
 
In 1994 Louise Milano of Des Plaines, Illinois claimed that she had been using the same typewriter ribbon since 1957. There are crucial details missing, such as how much she actually used that same ribbon over those 37 years, or how often she had to revitalize it, but here’s her shared technique:

“Hand roll all of the ribbon on one spool. Take a can of 3-in-1 Oil and oil drop by drop all around the ribbon. Wrap the ribbon in plastic cling wrap and let it sit for a couple of days. You'll be surprised at how much black is left on the ribbon."

 
And here’s another technique that has been used over the years:

“After the ribbon has been wound up on the spool tightly, remove it from the machine and lay it flat on a heavy piece of foil. Get pure glycerin at your drugstore, put some in an eye dropper and squeeze twelve drops or more (depending on the size of the spool) through the openings in the spool where the typewriter ribbon shows through. The glycerin will soak down through the ribbon, loosening all the old dry ink (this is why your typewriter didn't print darker) and rejuvenate the rib­bon. Wrap the spool of ribbon in the foil and leave it in the exact position it was in when you applied the glycerin. Let it soak for at least three days.”

 
One more home handyman pointer:

“Typewriter ribbon may be renewed by using machine oil. Squirt from the can onto the ribbon wound on the spool. Be sure to go all around it, even through the holes in the top of the spool. Fasten up in a plastic bag and leave until the oil penetrates all through the ribbon. It is as simple as that.”

 
Okay, just one more:

“You say you have ‘little-used’ ribbons, so I as­sume they must be dried out and faded. I called a typewriter-repair person and he said people some­times try inking old ribbons with the kind of ink you use for stamp pads, but this is a messy business and the ink will clog up the typing mechanism. It also evaporates quickly, and when it dries makes the ribbon stiff.”

 
I lied:

“Someone claimed that they had removed the spool of ribbon from her typewriter and put some oil on it and left it for a few days. She said it ‘wrote’ again. Thinking what oil might do to the rubber and all, I used glycerine instead. It is marvellous. I removed the spool, put drops of glycerine on the SIDE of the ribbon so It would sink in well and run down into the other side then wrapped it in heavy foil and put it in a drawer for nearly a month. (I am sure now that it only takes a few days.) After replacing the ribbon not only was it new looking but actually typed better! It was real black! We used this on both nylon and other types.”

None of these make mention of whether the ribbons were only black, or bicolour. However, if you did try it out and you applied the drops (glycerine or oil) to the red side of the ribbon any colour bleeding would go into the black, which in theory would not be nearly as bad as the other way around.


The pronoun has always been capitalized in the English language for more than 700 years.
 

20-11-2016 15:22:39  #7


Re: Wide ribbon?

Very interesting Uwe, thanks!
You also mentioend there were soem sources, but they were expensive?
Any tips for these just in cass?

     Thread Starter
 

20-11-2016 16:10:32  #8


Re: Wide ribbon?

There are definitely some on eBay (search for your specific model, or 'wide typewriter ribbon'). For example, there's 16mm x 8m black ribbon from one vendor who wants $27 USD for it! Ridiculous. I have the other sources written down somewhere and will have to find those notes.


The pronoun has always been capitalized in the English language for more than 700 years.
 

20-11-2016 16:26:40  #9


Re: Wide ribbon?

Thanks Uwe!

     Thread Starter
 

21-11-2016 17:07:17  #10


Re: Wide ribbon?

I just tried this idea, but with oil, not glycerin on a really ancient red/black ribbon that must be 50 years old.
It was compeltely gone and dried out. I sprayed oil through the spool 'spokes' and the side and put in aluminum foil for only a few hours close to the heater to make it warm - and now it already works like a charm! I do however think that the glycerin idea will be better, since every room I am typing in now starts to quickly smell like an oily machineshop (or the home of a typewriter nut ? )  

     Thread Starter
 

Board footera

 

Powered by Boardhost. Create a Free Forum