Typewriter Talk

You are not logged in. Would you like to login or register?



08-7-2018 19:53:01  #1


Royal Aristocrat Carriage Removal

Hello, all,

I'm a newbie and just bought a 1939 Royal Aristocrat whose carriage won't advance when using the spacebar or any of the keys. Otherwise, it appears to be in really good condition. The carriage moves back and forth very smoothly when I use the carriage release levers. I've given it a cleaning and replaced the draw strap and that seems fine now.  I've traced the linkages as far as I can and don't see any problem up to the escape wheel, but I can't see all the mechanics in there. I'm thinking I'd like to take the carriage off, so that I can see what's going on, but can't find any manuals on how to do that, and am thinking I might be over my head if I try to wing it.  I have a Royal KMM, and I know removing (and replacing!) their carriage is complicated, even with the military service manual that is available on line.

Any advice would be greatly appreciated.  Thanks!

 

10-7-2018 00:35:15  #2


Re: Royal Aristocrat Carriage Removal

Hi RCC

Getting the carriage off isn't the hard part, it's getting it back on again with all 4 carriage rail balls timed correctly and their corresponding star rings or anti-creep wheels in their correct positions. If you want to get a better look at the escapement, you'd be much further ahead to remove the platen and the paper trough so you can see the escapement from on top by looking through the slots in the carriage.

Also, check to see that the universal bar isn't stuck. This is the bar that runs across the very tail ends of the key levers. Move this bar up and down with your fingers to see if the escapement trips. I would post some pictures, but I had an argument with Photobucket and haven' signed up to a new photo hosting website yet. Let us know what you find,

Sky

 

10-7-2018 18:24:43  #3


Re: Royal Aristocrat Carriage Removal

Sky,

Thanks for the advice.

Yeah, ever since I was a little guy, I've been  learning that taking apart is a lot easier than putting back together!  I knew the Royal KMM carriage is really hard to remount, and I was afraid the Aristocrat's, being of the same period, would be similar.

I'm glad to hear that removing the platen and paper trough will give me another view angle - I didn't think it would. I think I can handle that operation. It'll give me a chance to do some more cleaning and check out the rollers too,

I'll keep you posted. Thanks again,
RCC

     Thread Starter
 

10-7-2018 18:28:28  #4


Re: Royal Aristocrat Carriage Removal

Sky,

I forgot to add that the universal bar seems to be free - it moves about 1/8" and moves the linkages that go up toward the escapement - as does the space bar.  I'm not sure if that is the normal distance, though.

RCC

     Thread Starter
 

Board footera

 

Powered by Boardhost. Create a Free Forum

Typewriter Talk