Typewriter Talk

You are not logged in. Would you like to login or register?



08-12-2018 18:47:32  #161


Re: SG Owners Club

Looks beautiful, how did you prepare the body surface for painting?? 

 

08-12-2018 19:24:42  #162


Re: SG Owners Club

To paint I took the parts to be painted off the machine then removed all chrome strips, logos, and rear identification plate. The parts were scrubbed with stiff brush and various cleaners including Scrubbing Bubbles and Simple Green. I then painted two medium coats of Rust-Oleum Hammered Verde Green over top of the original finish. The results look wrinkled, not hammered.

 

09-12-2018 04:56:44  #163


Re: SG Owners Club

+ PaulH
That's a very nice job - congratulations.


Sincerely,
beak.
 
 

06-1-2019 23:22:32  #164


Re: SG Owners Club

I've owned several SG-1's and just acquired my first SG-3, so some impressions on compare and contrast:

First impression was that the SG-3 had been cheapened, but second take is that it has been simplified. Gone are the over-the-top spring-loaded key tops.  But were they necessary?  I don't notice any discomfort typing without them.  The external appearance of the machine is of course grossly simplified: from crinkle to smooth, from appurtenances to smooth, from knobby to smooth... etc.  One cheapening though which seems to be entirely cheapening with no redeeming design value: the paper rest has gone from something which looks like it moonlights as a slide rule to a stubby thing with sloppy tolerances in the slide. I did not like the grommet and post method of attaching the top at first: it's not something you can just flip open, you have to stand up and pull it off the typewriter. If there are issues with the ribbon this can become annoying -- as received it was not reversing but after a new ribbon with the path right and the rivets in the right places it seems to be working fine, and with lack of need to open the machine annoyance fades.

The decision between them seems to be mainly a matter of decor -- though of course all machines are individuals - but I can say that after initial skepticism i would admit the SG-3 as a true and worthy successor to the SG-1, or at least the one I found which was still manufactured in Western Germany. 

 

Board footera

 

Powered by Boardhost. Create a Free Forum

Typewriter Talk