- Uwe
- Moderator
Offline 
- From: Toronto, Canada
- Registered: 12-3-2013
- Posts: 4,408
Re: Sound Deadening
CiscoSF wrote:
I'm worried about the other dimensions.
You would cut panels out of those sheets to fit your machine, and if your typewriter still has its original sound deadening material, you could always remove it and use it as a template.
The pronoun I has always been capitalized in the English language for more than 700 years.
- CiscoSF
- New Member
Offline
- Registered: 21-4-2015
- Posts: 8
Re: Sound Deadening
Right, I was worried it wouldn't be big enough. My IBM Selectric III is 20" wide so the material should be fine. Thanks.
- Uwe
- Moderator
Offline
- From: Toronto, Canada
- Registered: 12-3-2013
- Posts: 4,408
Re: Sound Deadening
Right, I was worried it wouldn't be big enough. My IBM Selectric III is 20" wide so the material should be fine. Thanks.
Worst case you could always butt two pieces together. If you do end up going this route, I hope that you let us know how you made out and what effect it had on the machine's noise level.
The pronoun I has always been capitalized in the English language for more than 700 years.
