1 of 1- skywatcher
- Moderator
Offline - From: The Prairies of Alberta
- Registered: 14-3-2013
- Posts: 737
WTB: Remington Feet & Draw Band
Greetings All
Recently picked up a 1961-ish Canadian built Remington standard typewriter, S/N-CJ618809
The unit is missing its draw band and the two rear feet.
Would anyone happen to have any of these parts available. Thanks in advance,
Sky
We humans go through many computers in our lives, but in their lives, typewriters go through many of us.
In that way, they’re like violins, like ancestral swords. So I use mine with honor and treat them with respect.
I try to leave them in better condition than I met them. I am not their first user, nor will I be their last.
Frederic S. Durbin. (Typewriter mania and the modern writer)
- Pete E.
- Typewriter Talk Elite
Offline
- From: Idaho - USA
- Registered: 23-6-2020
- Posts: 2,420
Re: WTB: Remington Feet & Draw Band
Hi Sky,
I got a Remington back on the road for a friend and used these "Everbilt" rubber pads that are 1.5" in diameter. Here in the States, I can get them at our big-box store, Home Depot. They also have a smaller size at 7/8" in diameter for smaller machines.
The metal retainer cups were missing on his machine, so I use a bit over-sized zinc-plated metal fender-washer between the rubber mounts and the machine frame. I looked for metal "cup washers" but had no luck so went with the fender-washers.
Good sturdy rubber product and price for 4 is great.
.
- skywatcher
- Moderator
Offline
- From: The Prairies of Alberta
- Registered: 14-3-2013
- Posts: 737
Re: WTB: Remington Feet & Draw Band
Hi Again
Forgot to mention that the screws for the feet are also missing. A neighbour who has a machine shop is looking at turning a couple for me with the ¼"-24 thread. I was thinking that a couple of automotive frost plugs would work for the metal cup and make the feet from two layers of punch cut conveyor belt glued together. I'll update once the screws are made. All the best,
Sky
We humans go through many computers in our lives, but in their lives, typewriters go through many of us.
In that way, they’re like violins, like ancestral swords. So I use mine with honor and treat them with respect.
I try to leave them in better condition than I met them. I am not their first user, nor will I be their last.
Frederic S. Durbin. (Typewriter mania and the modern writer)
- •
Thread Starter