1 of 1- lazydog
- Platen Punisher
Offline - From: North Carolina
- Registered: 06-2-2022
- Posts: 98
SM platens interchangeable?
Hi all,
I have several Olympia SMs, and would like to change out the much more supple platen from my 1977 SM9 for the rock hard one on my 1956 SM4. I do not think I can do this, because the variable release on the 1956 is via a button pressed IN on the right platen knob, and the later one via pulling OUT the left platen knob. So I assume different mechanisms=not interchangeable platens. But since both are working inside the platen in the same direction (to the left), I wonder if maybe I am wrong. Anyone got any thoughts before I try it and probably come to grief? Thanks!
- Pete E.
- Typewriter Talk Elite
Offline
- From: Idaho - USA
- Registered: 23-6-2020
- Posts: 2,178
Re: SM platens interchangeable?
Hi LD,,
My 1960 SM4 is 9-3/4" in length while my 1968 SM9 is 9-5/8" in length...from outside-edge of metal on right side to outside-edge of toothed gear on left side.
.
- lazydog
- Platen Punisher
Offline
- From: North Carolina
- Registered: 06-2-2022
- Posts: 98
Re: SM platens interchangeable?
that's a good point, Pete--probably not worth trying. thanks!
- •
Thread Starter