1 of 1- robmck
- Speed Champion
Offline - From: Seattle, WA
- Registered: 31-1-2022
- Posts: 374
Cleaning corrosion
Any ideas on cleaning out all this white crusty stuff? (I don't want to use the wrong chemical and make things worse). Not sure of the metallurgy of this part of the frame (is that zinc corrosion, or, ...?) Clearly there's also rust on the margin release arm, too. 
My first thought was to dunk it in the ultrasonic cleaner with just water and see what comes off, then give it a second bath with my usual dilution of Aviation Simple Green.
This is a 1939 Hermes Baby.
- thetypewriterman
- Key Master
Offline
- From: Leiston, England
- Registered: 29-5-2013
- Posts: 925
Re: Cleaning corrosion
I am pretty sure that the white stuff is aluminium corrosion - the aluminium equivalent to rust on steel. Obviously your machine has been stored somewhere very damp. I would try to brush it off dry with a brass-bristled brush.
- Pete E.
- Typewriter Talk Elite
Offline
- From: Idaho - USA
- Registered: 23-6-2020
- Posts: 2,420
Re: Cleaning corrosion
If those parts turning white originally were galvanized steel, the zinc in the galvanized coating on the steel can oxidize and become what is called "white rust".
.
