- brian
- New Member
Offline - From: Cincinnati
- Registered: 26-7-2013
- Posts: 7
Re: new to the forum
thank you very much. 2800 is alot of parts. can you tell me the name of the special tool used to work on these? it looks like a star but none of the sizes i have fit. if you ever need anything let me know. i've taken apart 5, so 2800x5=boxes full of parts.
- ProfessorC30
- Platen Punisher
Offline
- From: Arkansas, USA
- Registered: 20-4-2013
- Posts: 75
Re: new to the forum
Brian,
I think you mean the fluted wrenches called Bristol Wrenches. They look like allen wrenches, but have grooves down the sides instead of six smooth sides. Here's where I bought mine:
Yes, I could use some spare parts. As these machines are now all between 27 and 52 years old, the plastic parts fail first. The cycle clutch pulley (white plastic main gear that the belt runs on) and the Tilt Pulley Bellcrank (white plastic part on the carrier that the tilt tape is connected to). I'd love to have some good spares of these if you have any. Cracks in the cycle clutch pulley aren't a problem unless they extend into the belt cogs.
I could also use a charcoal TAB key button for a Selectric III. The on/off rockers and tab set/clear rockers are also commonly needed in gray and charcoal.
I can send you my address offline if you have any of these parts. Thanks.
Last edited by ProfessorC30 (31-7-2013 09:16:46)
Clark
- brian
- New Member
Offline
- From: Cincinnati
- Registered: 26-7-2013
- Posts: 7
Re: new to the forum
pm'd, and thank you for the wrench info!
Last edited by brian (31-7-2013 20:37:35)
- •
Thread Starter- TypeWriterTumbleWeed
- New Member
Offline
- Registered: 11-7-2023
- Posts: 9
Re: new to the forum
I find the art very impressive! Coming from an area with farms, I appreciate the tractor design.
Smith Corona XD6600 & Royal Alpha 2015
- Pete E.
- Typewriter Talk Elite
Offline
- From: Idaho - USA
- Registered: 23-6-2020
- Posts: 2,139
Re: new to the forum
The discussion you added a post to goes back all the way to 2013. Many of those folks making comments seem to no longer be active on the Forum in 2023.
BTW... California Typewriter is a 2016 American documentary film and one of the people highlighted in the movie is a sculptor that uses typewriter parts to make massively big works of art.
The shop, unfortunately, closed down in 2020 when the owner retired (and passed away a couple of years later) and the surviving family decided not to keep it going after the elder's retirement.
.
