1 of 1- ESC4P3
- Platen Punisher
Offline - Registered: 27-1-2023
- Posts: 75
WTB: 1962 Hermes 3000 left platen knob and clear card guide holder
Just purchased a 1962 Hermes 3000 which is missing the left platen knob and the clear card guide. If anyone has these for sale or knows where i could find them, I would greatly appreciate it.
Thanks,,
John
- Pete E.
- Typewriter Talk Elite
Offline
- From: Idaho - USA
- Registered: 23-6-2020
- Posts: 2,396
Re: WTB: 1962 Hermes 3000 left platen knob and clear card guide holder
Hi John,
Mr. Jacques Perrier in Switzerland is one of largest parts-suppliers for Hermes and even Olympia typewriters.
He sells and ships parts around the world. Usually he will want to see a photo or two of the machine or part you are needing.
I have been a customer several times. He ships quickly and the part are always perfect.
He also runs a Typewriter Museum.
His contact email is : musee@machineaecrire.ch
And a link about his Museum :
And a link to his site :
- Pete E.
- Typewriter Talk Elite
Offline
- From: Idaho - USA
- Registered: 23-6-2020
- Posts: 2,396
Re: WTB: 1962 Hermes 3000 left platen knob and clear card guide holder
And Amsterdam Typewriter in Holland is also a good source for knobs and feet...3D printed one.
I have a set of their feet on my H3K and my Baby as well. Excellent quality and nice and gripy rubber.
Owner is a nice gal and she ships quickly as well.
- ESC4P3
- Platen Punisher
Offline
- Registered: 27-1-2023
- Posts: 75
Re: WTB: 1962 Hermes 3000 left platen knob and clear card guide holder
Pete E. wrote:
Hi John,
Mr. Jacques Perrier in Switzerland is one of largest parts-suppliers for Hermes and even Olympia typewriters.
He sells and ships parts around the world. Usually he will want to see a photo or two of the machine or part you are needing.
I have been a customer several times. He ships quickly and the part are always perfect.
He also runs a Typewriter Museum.
His contact email is : musee@machineaecrire.ch
And a link about his Museum :
And a link to his site :
Thanks Pete. I have already emailed this guy/company based on an older posting by you, but I have not received any response after a few days. I found a seller from southern ca on ebay who i’m communicating with about a knob, but I can’t find a paper guide anywhere. I will try to contact Jacques Perrier again in a couple days. Duane Jensen also recommended him to me.
Thanks,
John
- •
Thread Starter- Pete E.
- Typewriter Talk Elite
Offline
- From: Idaho - USA
- Registered: 23-6-2020
- Posts: 2,396
Re: WTB: 1962 Hermes 3000 left platen knob and clear card guide holder
John,
If you are on FaceBook, you can also search for his full name and send him a Message. That is usually the fastest way to get a reply from Jacques.
- ESC4P3
- Platen Punisher
Offline
- Registered: 27-1-2023
- Posts: 75
Re: WTB: 1962 Hermes 3000 left platen knob and clear card guide holder
I’m not, but I think my wife is registered. Maybe i’ll try that. Thanks!
- •
Thread Starter- ESC4P3
- Platen Punisher
Offline
- Registered: 27-1-2023
- Posts: 75
Re: WTB: 1962 Hermes 3000 left platen knob and clear card guide holder
How long does Jaques tend to take to get back to you, Pete? Sent him a message on Facebook yesterday as you suggested and still no response. Duane at Phoenix Typewriter also recommended him to me. I’m getting antsy and might just order a 3d printed knob from a different vendor but so far unable to source the clear card guide.
- •
Thread Starter- ESC4P3
- Platen Punisher
Offline
- Registered: 27-1-2023
- Posts: 75
Re: WTB: 1962 Hermes 3000 left platen knob and clear card guide holder
Jacques did get back to me and he has both parts, so thanks again, Pete!
- •
Thread Starter- Pete E.
- Typewriter Talk Elite
Offline
- From: Idaho - USA
- Registered: 23-6-2020
- Posts: 2,396
Re: WTB: 1962 Hermes 3000 left platen knob and clear card guide holder
John,
Glad he was able to help you out. Post up a photo of your new machine when it is all sorted.
